Guangzhou Fanyin Optoelectronics Technology Co., Ltd

FD-X5 antenna amplifier

Other models： FD-X2 antenna amplifier FD-X5 antenna amplifier

FD-X5 Antenna Amplifier Product Description

Equipped with UHF antenna signal bandpass filtering function, it filters and suppresses attenuation of interference signals outside the bandpass range! The filtered RF signal is amplified and split into multiple outputs to compensate for insertion loss. The distribution system allows the use of four receivers and is also equipped with power plugs to supply power to each receiver! In addition, it is equipped with a cascaded RF signal port, which can be connected to the antenna input port of the fifth receiver or the second antenna distribution system. When splitting the antenna RF signal into multiple output ports, the signal strength will attenuate! Capable of amplifying and compensating signals to ensure a strong signal is provided to the receiver.

Characteristic introduction:
Compatible with all UHF wireless microphone receivers!
Antenna high-frequency signal band bandpass filtering function!
Provide 1 in 5 out RF signals and 4 DC12V output power supply capabilities!

Host technical parameters:
Antenna port feeding:	DC +12V ＜150mA
Port type:	BNC
RF bandwidth:	470 - 900 MHz
Allocate loop gain:	+10dB
Cascade loop gain:	+9dB
Port impedance:	50 ohms
Standing wave ratio:	＜1.5
Power supply:	DC +12V 3A
Host size:	482mm X 44mm X 235mm

Hyperdirectional receiving antenna parameters:

●Antenna type:	Logarithmic Periodic Direction (LPDA)
●Frequency range:	470-900MHZ
●Interface type:	TNC socket
●Impedance:	50 ohms
●Power Supply:	Phantom power supply+8V to+12V 75 mA
●Signal gain:	+15dB
●Directionality:	Horizontal 90 °, vertical 60 °
●Directional polarity:	Vertical polarization
●Appearance dimensions:	（L）320 X（W）300 X（D）28 mm

CONTACT US