At present, it is very common for large enterprise conference rooms in China to have 100 meters or more, and such large conference rooms are mainly used for business conferences, technical exchanges, news releases and voting. However, large meeting rooms are important for sound engineering solutions, and the entire meeting room needs to be properly arranged. Below, there are three different audio engineering solutions for enterprises!

Option 1: Surface-mounted

The use of surface-mounted sound engineering in the conference room is mainly conducive to the maintenance and maintenance of the sound in the later stage, but the area is relatively large, and if the space is insufficient, it is generally not recommended to adopt the surface-mounted mode, which will affect the overall appearance of the conference room.

When the sound is surface-mounted, it is necessary to pay attention to the reasonable installation of the position and angle to ensure that the frequency of the sound is the same in different directions, and it needs to be fixed firmly to avoid resonance and noise. In addition, it is important to avoid the influence between the signal source and the sound source, and to maintain a sufficient distance between the speakers when they are surface-mounted.

Option 2: Concealed installation

The sound engineering of the conference room adopts the concealed installation method, which can solve the problem of insufficient space for the conference room, but it will be difficult for subsequent maintenance and repair, and it is necessary to disassemble and assemble the physical or partition.

When the audio is concealed, some space entrances should be reserved in advance to facilitate the maintenance due to the long service life or the failure of the product itself. When concealed, an acoustic mask should be used for wrapping, and the decorative lattice should be recommended to be wedge-shaped and the opening rate should be greater than 75%, which should be controlled within the angle of sound radiation.

Scheme 3: hoisting

The hoisting method is used in the sound engineering to be very precise in terms of position and angle, and it is also very high in terms of tightness and fixation, so as to ensure the stability of the sound and the safety of the participants in the conference room. The purchase of hoisting sound response takes into account the reasonable matching of indoor colors to avoid affecting the overall appearance of the conference room.